The Aquatrek2 Pool Ramp allows for aquatic wheelchair access and can increase your aquatic therapy classes. The Aquatrek2 Long Pool Ramp system is used to reduce the slope ratio for placement in deeper pools. Using a longer lower platform and an elevation kit, the ramp system can be placed over steps as seen on the left and used in deeper pools as shown to the right. If you have any questions, please give us a call at 800-355-2956.
Standard Ramp:
- Ramp designed for pools 48" and under from pool floor to deck surface
- Elevation kits for decreasing the slope of ramp are available upon request
- Handrails provide excellent stability
- Noncorrosive metal skeleton encased in rigid PVC skin
- 600 pound weight capactiy
Designed as a practical solution for aquatic access, the AquaTrek2 pool Ramp lets people of all ages and abilities enter and exit the swimming pool with ease. The AquaTrek2 pool Ramp is available in two sizes, a standard or a long. The long ramp system is used for pool facilities that have depths of 48-inches or greater from pool floor to deck surface. The longer length allows the slope of the ramp to be decreased to accommodate the extra depth.
Measuring your pool:
A. Deck to the top of the curve
B. Deck to the bottom of the curve
C. Distance between A & B
D. Deck to pool floor at 2FT from pool wall
E. Deck to pool floor at 3FT from pool wall
F. Deck to pool floor at 4FT from pool wall
G. Deck to pool floor at 5FT from pool wall
H. Deck to pool floor at 6FT from pool wall
**Remember: Measurements are from the deck surface to the pool floor and NOT the water depth**
Standard Ramp:
- Ramp designed for pools 48" and under from pool floor to deck surface
- Elevation kits for decreasing the slope of ramp are available upon request
- Handrails provide excellent stability
- Noncorrosive metal skeleton encased in rigid PVC skin
- 600 pound weight capactiy
Designed as a practical solution for aquatic access, the AquaTrek2 pool Ramp lets people of all ages and abilities enter and exit the swimming pool with ease. The AquaTrek2 pool Ramp is available in two sizes, a standard or a long. The long ramp system is used for pool facilities that have depths of 48-inches or greater from pool floor to deck surface. The longer length allows the slope of the ramp to be decreased to accommodate the extra depth.
Measuring your pool:
A. Deck to the top of the curve
B. Deck to the bottom of the curve
C. Distance between A & B
D. Deck to pool floor at 2FT from pool wall
E. Deck to pool floor at 3FT from pool wall
F. Deck to pool floor at 4FT from pool wall
G. Deck to pool floor at 5FT from pool wall
H. Deck to pool floor at 6FT from pool wall
**Remember: Measurements are from the deck surface to the pool floor and NOT the water depth**
