The model of the tank is 4HT-1821-18 and the model for the generator is CG-1500-40. A generator, transducer, and tank make up an ultrasonic cleaning system, and Crest's systems are designed to provide the most effective precision cleaning results. We are an AUTHORIZED CREST ULTRASONICS DISTRIBUTOR and are licensed in the state of North Dakota. We carry the entire line of Crest cleaners so please contact us if you are in need of a larger or different model and we can start an auction for that particular model. A perfect cleaner for all large industrial grade applications. Crest as been making high-end ultrasonic equipment since 1961. This ultrasonic cleaner can be used on top of a counter, or you can counter sink this unit into any counter top. Please e-mail or call us at (701)223-9936 with any questions or concerns you may have about using this industrial grade cleaner. These units are brand new in a sealed box and HAVE NEVER been used or on display.
SPECIFICATIONS:
Model 4HT-1826-18 - Heated Ultrasonic Tank
- Tank Dimensions: 18" left to right by 26" front to back by 18" deep, 16” liquid depth.
- Tank Capacity: 32.4 gallons.
- Skirt Dimensions: 21" left to right by 29" front to back by 22.75" high.
- Tank Material: 14 gauge, 316L stainless steel bright-annealed finish.
- Skirt Material: 20 gauge, 304 stainless steel with a #4 finish.
- Heat: 4000 watts of strip heat.
- Temperature Control: A Bi-metal thermostat located on the tank skirt.
- Ultrasonic Frequency: 40 kHz.
- Ultrasonic Power: 1500 watts of power provided by eighteen (18), ceramicaly enhanced piezoelectric transducer modules
- Standard Features:
- 1" wide flange around top edge of protective skirt.
- Tank bottom sloped to drain.
- 3/4” fill port.
- 1-1/4” drain port.
- Three (3) 6' long of coaxial cables to connect to the ultrasonic generator.
- A 6' long power cable.
- Power requirements: 240 volts/60 Hz/1 phase, 16.66 amps.
Model CG-1500-40 - Ultrasonic Generator
- Consists of one (1) CG-1000-40 and one (1) CG-500-40
- Generator Dimensions: 17.25" left to right by 16" front to back by 12" high.
- Generator Frequency: 40 kHz.
- Generator Power: 1500 watts (one 1000-watt modules and one 500-watt module).
- Misc. Features:
- Solid state construction, high efficiency circuit with low heat dissipation.
- RFI filter (in compliance with FCC regulations).
- Patented constant power circuit design monitors power output continuously adjusting input power for controlled consistency.
- Axial cooling fan (27 CFM).
- Lighted on/off switch.
- Adjustable, front panel-mounted, amplitude power intensity control.
- Factory-set Tru-SweepTM sweep frequency at ± 1 kHz around the base frequency.
- Power requirements: 120 volts/60 Hz/1 phase (two (2) independent power cords with plugs – one 8.33 amps and one 4.17 amps).
SPECIFICATIONS:
Model 4HT-1826-18 - Heated Ultrasonic Tank
- Tank Dimensions: 18" left to right by 26" front to back by 18" deep, 16” liquid depth.
- Tank Capacity: 32.4 gallons.
- Skirt Dimensions: 21" left to right by 29" front to back by 22.75" high.
- Tank Material: 14 gauge, 316L stainless steel bright-annealed finish.
- Skirt Material: 20 gauge, 304 stainless steel with a #4 finish.
- Heat: 4000 watts of strip heat.
- Temperature Control: A Bi-metal thermostat located on the tank skirt.
- Ultrasonic Frequency: 40 kHz.
- Ultrasonic Power: 1500 watts of power provided by eighteen (18), ceramicaly enhanced piezoelectric transducer modules
- Standard Features:
- 1" wide flange around top edge of protective skirt.
- Tank bottom sloped to drain.
- 3/4” fill port.
- 1-1/4” drain port.
- Three (3) 6' long of coaxial cables to connect to the ultrasonic generator.
- A 6' long power cable.
- Power requirements: 240 volts/60 Hz/1 phase, 16.66 amps.
Model CG-1500-40 - Ultrasonic Generator
- Consists of one (1) CG-1000-40 and one (1) CG-500-40
- Generator Dimensions: 17.25" left to right by 16" front to back by 12" high.
- Generator Frequency: 40 kHz.
- Generator Power: 1500 watts (one 1000-watt modules and one 500-watt module).
- Misc. Features:
- Solid state construction, high efficiency circuit with low heat dissipation.
- RFI filter (in compliance with FCC regulations).
- Patented constant power circuit design monitors power output continuously adjusting input power for controlled consistency.
- Axial cooling fan (27 CFM).
- Lighted on/off switch.
- Adjustable, front panel-mounted, amplitude power intensity control.
- Factory-set Tru-SweepTM sweep frequency at ± 1 kHz around the base frequency.
- Power requirements: 120 volts/60 Hz/1 phase (two (2) independent power cords with plugs – one 8.33 amps and one 4.17 amps).
