The DASH Apex 12 STAT centrifuge offers simple controls and powerful performance to minimize lab error, reduce turnaround time, and streamline training. The user-friendly two-button interface makes it easier than ever to select a preset or program your custom validated STAT cycles. LED lid lighting indicates when the centrifuge is ready to load (off), running (on), or done (flashing) and prevents forgotten samples, even in the busiest labs. Each centrifuge comes ready to run with the rotor, tube holders, and warranty included in the affordable price.
Features:
- Electronic Timer – 3 easily selectable pre-set cycles (default or custom)
- Capacity – Up to twelve (12) tubes
- Tube Sizes – 3 mL to 10 mL: up to 17 mm x 75 – 100 mm
- Brushless DC Motor – Years of operation with no routine maintenance
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
Specifications:
- Height – 9 in. (23 cm)
- Width – 13 in. (33 cm)
- Depth – 15 in. (38 cm)
- Weight – 30 lbs (13.7 kg)
- Max. Acceleration Time – 35 Seconds
- Max. Deceleration Time – 40 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 95 to 253 VAC
- Frequency – 50/60 Hz
- Max. Power Requirements – 230 Watts
- Centrifuge Motor – 1/2 H.P. Brushless DCHeight – 9 in. (23 cm)
- Width – 13 in. (33 cm)
- Depth – 15 in. (38 cm)
- Weight – 30 lbs (13.7 kg)
- Max. Acceleration Time – 35 Seconds
- Max. Deceleration Time – 40 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 95 to 253 VAC
- Frequency – 50/60 Hz
- Max. Power Requirements – 230 Watts
- Centrifuge Motor – 1/2 H.P. Brushless DC
Preset Cycles:
- Preset 1: 5,200 RPM | 3 minutes | 4,000 xg
- Preset 2: 5,200 RPM | 5 minutes | 4,000 xg
- Preset 3: 3,600 RPM | 7 minutes | 2,000 xg
Features:
- Electronic Timer – 3 easily selectable pre-set cycles (default or custom)
- Capacity – Up to twelve (12) tubes
- Tube Sizes – 3 mL to 10 mL: up to 17 mm x 75 – 100 mm
- Brushless DC Motor – Years of operation with no routine maintenance
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
Specifications:
- Height – 9 in. (23 cm)
- Width – 13 in. (33 cm)
- Depth – 15 in. (38 cm)
- Weight – 30 lbs (13.7 kg)
- Max. Acceleration Time – 35 Seconds
- Max. Deceleration Time – 40 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 95 to 253 VAC
- Frequency – 50/60 Hz
- Max. Power Requirements – 230 Watts
- Centrifuge Motor – 1/2 H.P. Brushless DCHeight – 9 in. (23 cm)
- Width – 13 in. (33 cm)
- Depth – 15 in. (38 cm)
- Weight – 30 lbs (13.7 kg)
- Max. Acceleration Time – 35 Seconds
- Max. Deceleration Time – 40 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 95 to 253 VAC
- Frequency – 50/60 Hz
- Max. Power Requirements – 230 Watts
- Centrifuge Motor – 1/2 H.P. Brushless DC
Preset Cycles:
- Preset 1: 5,200 RPM | 3 minutes | 4,000 xg
- Preset 2: 5,200 RPM | 5 minutes | 4,000 xg
- Preset 3: 3,600 RPM | 7 minutes | 2,000 xg
