The HORIZON 6 routine centrifuge makes it easier than ever to process blood and urine specimens. Its six-tube capacity and small footprint make it ideal for labs and point of care facilities where repeatability is key. Use the simple, two-button interface to program your validated cycles, or set and lock to one of three (3) preset cycles based on recommendations by tube manufacturers and the CLSI. Bright LED lid lighting is off when the centrifuge is ready to load, on when running, and flashing at the end of cycle. Horizontal and fixed angle models available.
Features:
- Capacity – Up to six (6) tubes
- Tube Sizes – Up to 75-100 mm (3-10 mL)
- Factory Presets – Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU- Set and Lock Controls – The two-button interface allows users to select a cycle, or lock to a single cycle with the press of a button
- Intuitive Lid Lighting – No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Brushless DC Motor – Years of operation with no routine maintenance
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Quiet Operation – Enjoy a sound level of just 64 dBA
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
Specifications:
- Height - 9 in. (23 cm)
- Width - 12 in. (30 cm)
- Depth - 14 in. (36 cm)
- Weight - 12 lbs. (5.4 kg)
- Sound Level - 64 dBA
- Max. Acceleration Time - 20 Seconds
- Max. Deceleration Time - 20 Seconds
- Factory Setting Range - 1 to 30 Minutes (± 1%)
- Voltage - 95 to 253 VAC
- Frequency - 50/60 Hz
- Max. Power Requirements - 220 Watts
- Centrifuge Motor - 1/2 H.P. Brushless DC
- Max Speed - 3,800 RPM
Features:
- Capacity – Up to six (6) tubes
- Tube Sizes – Up to 75-100 mm (3-10 mL)
- Factory Presets – Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU- Set and Lock Controls – The two-button interface allows users to select a cycle, or lock to a single cycle with the press of a button
- Intuitive Lid Lighting – No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Brushless DC Motor – Years of operation with no routine maintenance
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Quiet Operation – Enjoy a sound level of just 64 dBA
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
Specifications:
- Height - 9 in. (23 cm)
- Width - 12 in. (30 cm)
- Depth - 14 in. (36 cm)
- Weight - 12 lbs. (5.4 kg)
- Sound Level - 64 dBA
- Max. Acceleration Time - 20 Seconds
- Max. Deceleration Time - 20 Seconds
- Factory Setting Range - 1 to 30 Minutes (± 1%)
- Voltage - 95 to 253 VAC
- Frequency - 50/60 Hz
- Max. Power Requirements - 220 Watts
- Centrifuge Motor - 1/2 H.P. Brushless DC
- Max Speed - 3,800 RPM
