Outfit your laboratory or clinic with a centrifuge that meets your needs. Our microcentrifuge is ideal for classrooms, researchers, or personal use. Its compact size, powerful motor, and ease-of-use design provide the quality you desire at the price you want.
CAPABILITIES:
- Fast enough for DNA research but inexpensive enough for any lab or researcher!
- Large, high-capacity, easy-load rotor!
- Delivers 1735 to 6238 relative centrifugal force!
FEATURES:
- Large, 16 position capacity rotor accommodates 1.5-2.0 ml tubes.
- Each hole is clearly numbered.
- Easy change rotor simply snaps on/off without screws or nuts to lose.
- Extra rotors available at a reasonable price to accommodate large classrooms.
- Easy load rotor allows tubes to be loaded and unloaded in a vertical position while spinning in a 45° position.
- Large, easy-to-use control knob with easy-to-read graphics indicating RPM and G force.
- Forced air ventilation assures specimens, rotor, and motor stay cool, even during extended runs.
PERFORMANCE:
- Four position switch: Off • Pulse • 6,000 RPM • 10,000 RPM
- Provides 1735 to 6238 relative centrifugal force (RCF)
- Heavy duty, all-ball-bearing, 2.7 lb. motor smoothes out vibrations while running cool.
- Oversized 10 mm shaft will not bend from abuse or imbalance.
- Rapid slow down, from 10,000 RPM to zero in approximately 20 seconds.
CONSTRUCTION:
- Compact, efficient rounded shape saves on scarce bench space.
- Tough, high-impact housing will not dent, rust or chip.
- Large, clear cover for complete rotor and tube visibility.
- Oversized soft rubber base: Efficiently absorbs vibration and noise transmitted to work surface, stops ‘bench walking’, resists tipping, absorbs impact from careless handling.
SAFETY:
- Interlock switch cuts power until cover is locked in place.
- Instant-stop function electrically brakes rotor within two seconds when cover is rotated while rotor is in motion.
- Double electrically-insulated construction.
- Grounded power cord.
- Non-skid base prevents centrifuge from 'walking' off work surface during operation.
SPECIFICATIONS:
- Model No.: RS-102
- Power requirements: 110 -120 VAC 60 HZ 1.5 amps
- Net weight: 5 lb.
- Dimensions: 9" tall x 7.5" diameter
- Motor: All ball bearing, high efficiency permanent magnet DC
- Speed selections: Off/Pulse/6,000/10,000
- RPM: Low-6,000 High-10,000
- RCF: Low-1735/2245, High-4819/6238
- Rotor capacity: 16 tubes, 1.5 or 2.0 ml (holes numbered 1-16)
- Rotor type: 45°, unique vertical loading, glass fiber reinforced
- Warranty: 2-Year
CAPABILITIES:
- Fast enough for DNA research but inexpensive enough for any lab or researcher!
- Large, high-capacity, easy-load rotor!
- Delivers 1735 to 6238 relative centrifugal force!
FEATURES:
- Large, 16 position capacity rotor accommodates 1.5-2.0 ml tubes.
- Each hole is clearly numbered.
- Easy change rotor simply snaps on/off without screws or nuts to lose.
- Extra rotors available at a reasonable price to accommodate large classrooms.
- Easy load rotor allows tubes to be loaded and unloaded in a vertical position while spinning in a 45° position.
- Large, easy-to-use control knob with easy-to-read graphics indicating RPM and G force.
- Forced air ventilation assures specimens, rotor, and motor stay cool, even during extended runs.
PERFORMANCE:
- Four position switch: Off • Pulse • 6,000 RPM • 10,000 RPM
- Provides 1735 to 6238 relative centrifugal force (RCF)
- Heavy duty, all-ball-bearing, 2.7 lb. motor smoothes out vibrations while running cool.
- Oversized 10 mm shaft will not bend from abuse or imbalance.
- Rapid slow down, from 10,000 RPM to zero in approximately 20 seconds.
CONSTRUCTION:
- Compact, efficient rounded shape saves on scarce bench space.
- Tough, high-impact housing will not dent, rust or chip.
- Large, clear cover for complete rotor and tube visibility.
- Oversized soft rubber base: Efficiently absorbs vibration and noise transmitted to work surface, stops ‘bench walking’, resists tipping, absorbs impact from careless handling.
SAFETY:
- Interlock switch cuts power until cover is locked in place.
- Instant-stop function electrically brakes rotor within two seconds when cover is rotated while rotor is in motion.
- Double electrically-insulated construction.
- Grounded power cord.
- Non-skid base prevents centrifuge from 'walking' off work surface during operation.
SPECIFICATIONS:
- Model No.: RS-102
- Power requirements: 110 -120 VAC 60 HZ 1.5 amps
- Net weight: 5 lb.
- Dimensions: 9" tall x 7.5" diameter
- Motor: All ball bearing, high efficiency permanent magnet DC
- Speed selections: Off/Pulse/6,000/10,000
- RPM: Low-6,000 High-10,000
- RCF: Low-1735/2245, High-4819/6238
- Rotor capacity: 16 tubes, 1.5 or 2.0 ml (holes numbered 1-16)
- Rotor type: 45°, unique vertical loading, glass fiber reinforced
- Warranty: 2-Year
